|
|
Designing intelligent data distribution networks
Stojaspal, Martin ; Škorpil, Vladislav (referee) ; Mišurec, Jiří (advisor)
Master thesis on topic Design of intelligent data distribution network is focused on the design of KNX bus system. The theoretical part is focused on problematic of KNX technology and on the rules, regulations and forms which must correct project documentation contain. The practical part is focused on creation of complete design of project documentation KNX bus system. In this thesis is basically shown how project documentation should look like.
|
|
|
Analyze and economic time series forecasting by using selected statistical methods
Skopal, Martin ; Charvát, Pavel (referee) ; Mauder, Tomáš (advisor)
V této diplomové práci se zaměřujeme na vytvoření plně automatizovaného algoritmu pro předpovědi finančních řad, který se snaží využít kombinační proceduru na dvou úrovních mezi dvěma rodinami předpovědních modelů, Box-Jenkins a Exponenciální stavové modely, které jsou schopny modelovat jak homoskedastické tak heteroskedastické časové řady. Pro tento účel jsme navrhli selekční proceduru v prostředí MATLAB pro modely ARIMA. Výsledný kombinovaný model je pak aplikován několik finančních časových řad a jeho výkonost je diskutována.
|
|
|
Demonstration examples with KNX/EIB
Křivka, Martin ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
This diploma thesis was created as a support for Building automation course, at the Institute of Automation and Computer Science of the Faculty of Mechanical Engineering at Brno University of Technology. The aim of this diploma thesis is to get acquainted with elements of intelligent electrical ABB i-bus® KNX/EIB and create tasks suitable for laboratory teaching. Subsequently, use the communication module DataLab IF/EIB to connect KNX/EIB with Control Web system and create in this environment visualization of the status of these devices. Furthermore, using the communication module CM EIB/KNX to connect KNX/EIB with the programmable controller LOGO! and create additional laboratory task.
|
|
|
Development of KNX installation demo-board
Mitrenga, Michal ; KNX), Josef Kunc (Národní asociace (referee) ; Fiedler, Petr (advisor)
The aim of this diploma thesis is to compile a demonstration panel as an example of the functions of intelligent electrical installation KNX. One of the advantages of this system bus is the ability to use devices from multiple manufacturers. A total of 20 devices from 12 different manufacturers are used in this work. The work begins with an explanation of the principle on which the KNX system bus works, followed by a description of the equipment used and the electrical connection of the switchboard according to the wiring diagram. Next, how the whole panel was revived is described. The next chapter contains a detailed description of device programming in ETS, ie setting parameters for individual devices and assigning group addresses. The last chapter deals with visualization and remote control. It explains how a communication channel was created to connect the panel to a server from FlowBox. Using the web interface on this server, a visualization was created, which can be used to remotely control the entire panel from anywhere.
|
|
|
Intelligent installation system ABB i-bus® KNX/EIB Education board
Michalčík, Jiří ; Zuth, Daniel (referee) ; Marada, Tomáš (advisor)
The thesis deals with the topic of intelligent installation systems in the context of non-industrial automation. The first part discusses the KNX technology as well as realization of educational board demonstrating the i-bus® intelligent installation by ABB, designed according to KNX/EIB standard. Text further explains the specifics of board elements in detail. Second part is dedicated to created tutorial tasks, targeted to be used by students. These tasks are focused on the basic board element properties and their collaboration.
|
|
|
Design and programming of lighting scenes in an art gallery with visualization
Novotný, Jaromír ; Kunc, Josef (referee) ; Bátora, Branislav (advisor)
This work is intended to serve as an introduction to the theoretical basis for working with decentralized bus system named KNX. There is describe the current lighting solutions situation in the O. H. Hajek gallery in town Prachatice. There is familiarization with devices were used for this solution. The last part is describing how to work with the ETS and programming devices. To visualize system on smart device based Android was chosen SmartServer and is theoretically described in chapter Vizualizace.
|
|
|
Control of light sources in an intelligent installation
Kurzępa, Marek ; Huzlík, Rostislav (referee) ; Veselka, František (advisor)
This bachelor thesis focuses on the problem of the use of the intelligent installation, particularly the KNX system. The first section compares the concept of the classical and the smart installation. This comparison is later followed by a model example of the proposed solution of the control of lighting in a three storey house, especially in terms of the employed devices and their approximate price calculations. Further is introduced the principle of the function of the system KNX bus type TP1. The main aim of this work is the design and the implementation of the educational panel, familiarization with the software tool ETS4 and the presentation of its tools for the diagnosis of system KNX installation.
|
|
|
Emissions trading system - European Union and China
Krutek, Lukáš ; Fabšíková, Tereza (advisor) ; Sobotka, Michal (referee)
Emissions trading system - European Union and China Abstract Emissions trading systems are one of the many instruments used in environmental protection policy. This market-based economic mechanism governs the trading of units of selected pollutants, which are for these purposes considered as a tradable commodity. This approach was pioneered by the European Union, whose emissions trading system has over the years become the largest and most successful emissions trading system in the world. The results achieved, but also the experience from the failures of the European system, have attracted international attention and inspired other countries to actively use emissions trading. So far, the People's Republic of China is the latest major subject working to implement a new emissions trading system. The choice of the path towards the establishment of a national emissions trading system demonstrates a desire to become a leading actor in global climate policy and to move towards achieving its goals in line with its obligations under international law, including the ambitious goal of peaking carbon dioxide emissions by 2030 in its rapidly developing economy. This master's thesis introduces and highlights for the reader the basic structural elements common to all emissions trading systems and further details the...
|
|
|
Development of KNX installation demo-board
Mitrenga, Michal ; KNX), Josef Kunc (Národní asociace (referee) ; Fiedler, Petr (advisor)
The aim of this diploma thesis is to compile a demonstration panel as an example of the functions of intelligent electrical installation KNX. One of the advantages of this system bus is the ability to use devices from multiple manufacturers. A total of 20 devices from 12 different manufacturers are used in this work. The work begins with an explanation of the principle on which the KNX system bus works, followed by a description of the equipment used and the electrical connection of the switchboard according to the wiring diagram. Next, how the whole panel was revived is described. The next chapter contains a detailed description of device programming in ETS, ie setting parameters for individual devices and assigning group addresses. The last chapter deals with visualization and remote control. It explains how a communication channel was created to connect the panel to a server from FlowBox. Using the web interface on this server, a visualization was created, which can be used to remotely control the entire panel from anywhere.
|
|
|
Genetická diverzita a fylogeneze zástupců rodu Crassula L.
Jánová, Anna
The topic of this work was the use of variable DNA regions for clarification of phylogenic relations of closely related South African species of Crassula L. genus. Based on preliminary dendrogram which was constructed according to chloroplast regions, 69 members of Crassula genus were used for analysis. Variable regions of chloroplast DNA (matK, rps16) as well as nuclear regions of DNA (ITS, ETS) of these members were analyzed. This work was focused on variable regions of nuclear DNA mainly to ETS region which was found as the most suita-ble for phylogenic study of this group of plants. These four regions of DNA were amplified and sequenced for all 69 analyzed members of Crassula genus. The multiple alignments of all DNA sequences were evaluated. The results confirm hypothesis that chosen noncoding nucle-ar DNA regions can be more suitable for phylogenetic study of these closely related species than chloroplast DNA regions because of their much higher variability. The ETS region shoved highest variability of all regions used in this work, so it appears as suitable for detailed phylogenetic analysis of the Crassula genus.
|
guest ::
